Specifications

6-21
Invoking MACHINE SETUP functions
MEDIA CUT
Set a key assignment for media cutting and the operation after cutting.
ASSIGN CUT KEY
Set whether to assign [] key to direct key of media cut.
Set Value: [ON, OFF]
When assigned to direct key, media cut is selected with [] key in the local mode, and when it is exe-
cuted, feeding is performed automatically until the printed image passes the cut line and then automatically
cut.
MOVE DROP MEDIA
Set the ejecting operation of a media on the platen after cutting.
Set Value: [ON, OFF]
When OFF is set, the media is not moved back and forth after cutting.
TIME SET
Set the date and time on the printer.
A past date and time up to 8 o’clock can be input.
If you have set a time in the future by mistake, the setting value can be returned to the previous setting
value by pressing the [FUNCTION] key. However, it is only the last previous setting value that the setting
made by mistake can be returned to.
The actually indicated last previous setting time is the last previous setting value plus the actually elapsed
time.
UNIT SETUP
Set the units of measure to be used with the printer.
Temperature
Set the unit of temperature.
Available setting values: [° C ( Centigrade) , ° F ( Fahrenheit) ]
Length
Select the unit system for the units of length and area.
Available setting values: [mm , inch]
Unit system Units
Millimetre mm m m²
Inch inch , mil ft ft²