Specifications

6 Operation for Functions
6-12
AUTO CLEANING (See 3-62)
Set whether or not to clean the heads automatically before printing.
Available setting values: [ON, OFF]
The cleaning will be performed prior to the first printing after the printer is put on. Subsequently, the clean-
ing is made for each meter of drawing prior to each drawing.
The detail setting menu is displayed by pressing the [FUNCTION] key during automatic cleaning ON/OFF
selection.
CLEANING INTERVAL
Set the interval at which cleaning is to be performed periodically during printing.
Available setting values: [10 ~ 10000 mm] ( Default: 1000 mm)
CLEANING TYPE
Set a type of automatic cleaning.
Available setting values: [SOFT, NORMAL, HARD]
The setting values for each user type are stored separately from those for other user types.
Maintenance while printing (See 3-64)
While printing, set whether to perform automatic cleaning or wiping the heads.
Available setting values: [CLEANING , WIPING , OFF]
Cleaning will be performed at a movement interval as a unit after starting each drawing.
When cleaning is selected, the details setting menu is obtained with [FUNCTION] key.
Wiping will be performed at each scanning times as a unit after starting each drawing.
When wiping is selected, the details setting menu is obtained with [FUNCTION] key.
The setting values for each user type are stored separately from those for other user types.
HEAD GAP (See 3-5)
Set the head gap (height from the media to the nozzle plane of the heads).
Available setting values: [1.5 mm ~ 7.0 mm] (In steps of 0.1 mm / Default: 1.5 mm)
The upper limit of the head gap varies with media thickness.
The setting values for each user type are stored separately from those for other user types.
MEDIA DETECT
Detection method
Set the method for detecting the media
Available setting values: [SELECT, WIDTH] ( Default: SELECT)
Detection at media cutting
Set the detection method at media cutting.
Available setting values: [BOTH EDGE, LEFT EDGE, RIGHT EDGE, NONE] ( Default: BOTH EDGE)
The setting values for each user type are stored separately from those for other user types.
SELECT
Select whether to detect a roll media (detect only the width) or to detect a cut sheet media (detect
the width and length).
WIDTH The printer will detect only the width without requireing any key input.