Specifications

6 Operation for Functions
6-4
Settings of the setup functions
The operation described below on the operation panel is required to execute the setup functions.
STEPS:
1 Make sure that the printer is in LOCAL mode, and then select [SET UP] using the
[FUNCTION] key and press the [ENTER] key.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select an appropriate one of Type 1 to Type 4 by means of [] or [], and press the
[ENTER] key.
Set the printing conditions.
3 Select a setup function and make setting.
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
FUNCTION
SET UP <ENT>
SET UP
SELECT : TYPE 1
SET UP
SELECT : TYPE 2