Specifications

5 In Case of Trouble
5-22
∗∗∗∗∗ ERROR 58 ∗∗∗∗∗
POSITION ENCODER:DIR
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗ ERROR 58 ∗∗∗∗∗
POSITION ENCODER:CNT
An error occurred in the control sys-
tem.
∗∗∗∗∗ ERROR 59 ∗∗∗∗∗
CUTTER ENCODER
An error occurred in the control sys-
tem.
∗∗∗∗∗ ERROR 64 ∗∗∗∗∗
TAKE-UP VOLTAGE
An error occurred in the heavy-duty
take-up device control system.
∗∗∗∗∗ ERROR 64 ∗∗∗∗∗
FEEDER VOLTAGE
An error occurred in the heavy-duty
feeding device control system.
∗∗∗∗∗ ERROR 64 ∗∗∗∗∗
TAKE-UP VOLTAGE (small)
An error occurred in the small take-up
device control system.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗ ERROR 65 ∗∗∗∗∗
TAKE-UP TENSION-BAR
An error occurred in the heavy-duty
take-up device control system.
∗∗∗∗∗ ERROR 66 ∗∗∗∗∗
FEEDER TENSION-BAR
An error occurred in the heavy-duty
feeding device control system.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
TAKE-UP UNIT 00
Not connected with heavy-duty take-
up device.
Check the connection of heavy-duty
take-up device.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
TAKE-UP UNIT 01
Wrongly connected with heavy-duty
take-up device.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
TAKE-UP UNIT 04
An error occurred in the heavy-duty
take-up device.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
FEEDER UNIT 00
Not connected with heavy-duty feed-
ing device.
Check the connection of heavy-duty
feeding device.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
FEEDER UNIT 01
Wrongly connected with heavy-duty
feeding device.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
FEEDER UNIT 04
An error occurred in the heavy-duty
feeding device.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
Small TAKE-UP UNIT
Wrongly connected with small take-up
device.
Check the connection of small take-up
device.
∗∗∗∗ ERROR 116 ∗∗∗∗
NCU I/F 00
An error occurred in the control sys-
tem.
Operation can be resumed after turning
off the nozzle missing detection func-
tion.
Turn off the power to the printer and
turn it on after a while.
If the error occurs frequently, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 116 ∗∗∗∗
NCU I/F 01
An error occurred in the control sys-
tem.
∗∗∗∗ ERROR 120 ∗∗∗∗
ENVIRONMENT TEMP(LO)
The ambient temperature is outside the
permissible temperature range (too
low).
Adjust the ambient temperature within
a range of available temperature.
∗∗∗∗ ERROR 121 ∗∗∗∗
ENVIRONMENT TEMP(HI)
The ambient temperature is outside the
permissible temperature range (too
high).
Error message Cause Remedy