Specifications

4-25
Wiper cleaning
5 Pull out the wiper by holding the projections at both ends.
6 Remove the ink from the wiper and the bracket using a cotton swab dampened with
the cleaning solution.
7 After cleaning the wiper, install it in position by holding the projections at both ends.
Be careful of the direction of the wiper.
8 Wipe off ink or dirt adhering to the wiper cover using a cotton swab dampened with
the cleaning solution.
Be careful not to leave lint of the cotton swab. Lint may cause printing failure.
9 Close the maintenance cover, and press the [ENTER] key.
After performing the initial operation, the printer returns to LOCAL mode.
 Replace the wiper with a new one if it is badly soiled or curled. To replace the
wiper, terminate the work instructed here first and then follow the wiper
replacement procedure. (See 4-46)
Clean a wiper and
bracket.
WIPER WASH
COMPLETED : ent
∗Being Initialized∗
PLEASE WAIT