Specifications

4-3
Routine Maintenance
Notes on cleaning solution
Use the cleaning liquid dedicated for the ink being used.
Cleaning exterior surfaces
If exterior surfaces of the printer is stained, dampen a soft cloth with water or a neutral detergent diluted
with water, squeeze it and wipe the surfaces with the cloth.
Cleaning the platen
The platen may be stained with lint or paper dust produced by media cutting.
Brush or wipe dust from the platen with a soft brush, a dry cloth or paper towel.
If it is stained with ink, wipe it off with a paper towel containing a little amount of the cleaning solution.
When cleaning the platen, remember that dust and dirt can accumulate easily in the groove for the media
press and the groove (cutter line) for media cutting.
ES3 INK
Cleaning solution 200 for Solvent Ink (SPC-0369)
MILD SOVENT WASHING LIQUID (SPC-0294)
HS INK
Eco-HS1 INK
Sublimation transfer ink (Sb51) Cleaning Liquid Bottle Kit A29 (SPC-0137) [Sold separately]
Water-based Cleaning Liquid Cartridge (SPC-0259) [Sold separately]
 Before starting to clean the platen, make sure that the platen has cooled ade-
quately.