Specifications

3-67
Display of [INK NEAR END] or [INK END]
Display of [INK NEAR END] or [INK END]
A message appears when one of the two ink cartridges in a set is completely empty and the other is nearly
empty.
Once the [INK NEAR END] message appears, printing can be continued but the ink may run out during print-
ing. Immediately replace the relevant ink cartridge with a new one.
Indication of remaining amount of ink for each cartridge
Pressing the [ENTER] key in REMOTE mode or LOCAL mode will display the remaining amount of ink.
When an ink-related error has occurred, pressing the [INFORMATION] key will display the warning con-
cerning the current supply cartridge. (Refer to “Function Flowchart [LOCAL mode] (p.6-42)” )
INK NEAR END: displayed when a color of ink has been nearly used up.
The display indicates the color of ink that has been nearly used up.
The display shown below indicates that the black ink has been nearly used up.
INK END: displayed when a color of ink has been completely used up.
The display indicates the color of ink that has been completely used up.
The display below indicates that the magenta ink has been completely used up.
 Once the red one of Cartridge LEDs starts flashing or [NEAR END] is indicated
on the LCD, replace the ink cartridge without delay.
Never remove any cartridge if there is no cartridge to be installed in place of the
cartridge to be removed. If any cartridge is kept removed without another one
installed instead of the removed one, the ink supply path will dry, thus resulting
in a malfunction of the printer. If ten minutes have passed with any cartridge
removed and without another one installed, the printer will warn the operator
by sounding the warning buzzer.
Before starting continuous printing, be sure to check the ink level for adequacy.
The printer will stop printing if ink runs out during printing. A change in color
may be found when printing is resumed. The cause is the difference in drying
time between the print area before the stop of printing and that after the
resumption of printing.
FLUSHING BOX 12.3%
ErrorDetail = [INFO]
ES3-INK MCYKKYCM
REMAIN 23456789
Ink will be finished
soon. Exchange it.
INK NEAR END
−−−− −−KK −−−− −−−−
[INK NEAR END]
Ink was finished
Exchange it.
INK END
MM−− −−−− −−−− −−−−
[INK END]