Specifications

3 Printing
3-20
Selecting and checking printing conditions
When the Type 1 to Type 4 printing conditions have already been registered, only selecting an appropriate
Type is required to switch between the settings to meet the desired printing.
How to select a user type
STEPS: (Setting by [FUNCTION] key)
1 Make sure that the printer is in LOCAL mode, and then select [SET UP] using the
[FUNCTION] key and press the [ENTER] key.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select an appropriate one of Type 1 to Type 4 using [] or [], and press the
[ENTER] key.
STEPS: (Setting by [USER TYPE] key)
1 Make sure that the printer is in LOCAL mode, and then press the [USER TYPE] key.
The user type can be changed in the order of 2 → 3 → 4 → 2... by pressing the [USER TYPE] key. It can also
be changed using the [] or [] key.
Press the [ENTER] key to return to LOCAL mode.
How to check the user type
The user type currently used for printing can be identified by such an indication as [L.1] or [R.1] that is
displayed in LOCAL mode or REMOTE mode.
 The number in the ( ) following Type represents the current type.
FUNCTION
SET UP <ENT>
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
SET UP
SELECT : TYPE 2
SET UP
SELECT : TYPE 1
USER TYPE CHANGE
TYPE (1) −> <2> : ent
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
L. 1 > [JV5-01]
width : ∗∗∗∗ mm
R. 1 > [JV5-01]
∗∗.∗∗ m
[LOCAL mode] [REMOTE mode]