Specifications

3 Printing
3-16
When [MEDIA RESIDUAL] of [MAINTENANCE] function has been set to ON
STEPS:
1 Detection is completed, and the carriage returns to the station.
2 Input a value of the media length using the [] or [] key and press the [ENTER] key.
3 However, only press the [END] key when the value to be input is identical with the
previously input value.
Initial value: 50 m; Input range: 1 m to 500 m (in units of 1 m)
4 The printer returns to LOCAL mode.
Input of MediaLength
MEDIA LENGTH = 50 m