Specifications

2-29
About Function Menus
MAINTENANCE functions
Function name Sub function Setting value Function
ST.MAINTE-
NANCE
CARRIAGE OUT
(Can be selected directly by pressing
[ST.MAINT] key.) (p. 4-7)
Move the carriage when cleaning the
inside of the station and replacing
consumables.
Do not move the carriage out of the
capping station by hand. Select the
[ST.MAINTENANCE] - [CAR-
RIAGE OUT] to move the carriage.
WIPER EXCHANGE
(Can be selected directly by pressing
[ST.MAINT] key.) (p. 4-57)
When the display shows that the
wipers must be replaced, perform
this operation and replace the wip-
ers.
NOZZLE WASH
(Can be selected directly by pressing
[ST.MAINT] key.) (p. 4-10)
Washes the nozzles with a cleaning
kit to correct nozzle clogging and jet
deviation.
DISWAY WASH
(Can be selected directly by pressing
[ST.MAINT] key.) (p. 4-14)
Washes the ink discharge passages
(pump tubes) to prevent their clog-
ging.
CUSTODY WASH
(Can be selected directly by pressing
[ST.MAINT] key.) (p. 4-16)
When the operation of the printer is
to be suspended for more than one
week, wash the nozzles in the heads
and ink discharge passages and
make arrangements for storage.
PUMP TUBE WASH
(Can be selected directly by pressing
[ST.MAINT] key.) (p. 4-23)
Washes the ink suction pumps.
WIPER WASH
(Can be selected directly by pressing
[ST.MAINT] key.) (p. 4-25)
Washes the wiper.
Sub-INK
MAINTE.
[Only when dedi-
cated sublimation
transfer ink is
used.]
INK TRAY
CLEAN.
(p. 4-51)
Moves the carriage when cleaning
the ink tray of the flushing box.
FILTER
EXCHANGE
(p. 4-49)
Moves the carriage when replacing
the filter on the flushing box.
CR.MAINTENANCE (p. 4-28) Move the head unit to the left end of
the printer and perform maintenance
of the heads and related parts.
HD.MAINTE-
NANCE
FILL UP INK (p. 3-31) The heads are charged with ink.
Use this function if nozzles are not
unclogged by [CLEANING] and
[NOZZLE WASH].
DISCHARGE&WASH (p. 5-6) Discharges ink from the heads,
dampers and ink tubes, and washes
them with an cleaning solution car-
tridge (option).
MaintWashLiq-
uid (p. 4-20)
FILLING UP Supplies the cleaning liquid for the
wiper and pump tubes.
DISCHARGE Discharges the cleaning liquid for
the wiper and pump tubes.