Specifications

2 Before Use
2-4
Rear
Name Function
1
Ink cartridge for cleaning
Use this cartridge when performing maintenance.
When using solvent ink, use MILD SOLVENT cleaning solution cartridge
(SPC-0294).
When using water-based ink or sublimation transfer ink, use water-based clean-
ing solution cartridge (SPC-0259).
2
Clamp lever (rear) Interlocked with the clamp lever in the font of the printer.
3
Media support bar This bar facilitates setting a roll media in position.
4
Pre-heater Preheats the media before printing. (Located inside the platen)
5
Roll holders
Roll holders are inserted into the right and left ends of the core of the roll media
to hold the media. The roll holders can be used for media cores that have a
diameter of 2 inches or 3 inches.
6
Main power switch
Turns on/off the main power for the printer. Leave the main power turned on to
prevent ink clogging.
Turn off the power switch in front, before turning off the main power switch.
7
AC inlet Connect the power cable to the AC inlet.
1
5
2
6
3
74