Specifications

2-3
Configurations and Functions
4 Maintenance cover L
Open the maintenance cover L and/or maintenance cover R when doing so is
required for maintenance. Even when the power switch is off, keep all covers
closed.
5
Platen
The printed media is sent out, sliding on the platen. Three heaters are installed
inside the platen.
6
Post-heater Dries the ink on the printed media.
7
Print heater
Fixes and dries the ink on the currently produced print. (Located inside the
platen)
8
Front exhauster
This unit consists of the drying fan to accelerate drying the ink during printing
and the exhaust fan to blow out the odor of ink.
9
Clamp lever (front) Moves the pinch rollers up and down to hold or release the media.
10 Take-up device Automatically winds up the roll media printed.
11
Front cover
Open this cover when media is to be set or the jammed media is to be removed.
Even when the power switch is off, keep this cover and the other covers closed.
12
Carriage Moves the print head unit from side to side.
13
Operation panel
This panel has the operation keys required for operating the printer and the
LCDs for displaying setting items, etc.
It is also provided with the power switch for the heaters and the LEDs for indi-
cating the heater status.
14
Power switch
Turns on/off the power to the printer.
While the main power switch is on, the operation to prevent ink clogging is per-
formed periodically even when the power switch is off. (Flushing function)
15
Maintenance cover R
Open the maintenance cover R and/or maintenance cover L when doing so is
required for maintenance. Even when the power switch is off, keep all covers
closed.
16
Capping station Incorporates the ink caps, with which the heads are covered, and the wiper, etc.
17
USB 2.0 connector USB 2.0 interface.
18
Stand
Supports the main body of the printer. It is provided with casters that are used to
move the printer.
19
Waste ink tank Waste ink gathers in this tank.
Name Function