Specifications

6 Operation for Functions
6-10
AUTO CLEANING (See 3-43)
Set whether or not to clean the heads automatically before printing.
Available setting values: [ON, OFF]
The cleaning will be performed prior to the first printing after the printer is put on. Subsequently, the cleaning is made
for each meter of drawing prior to each drawing.
The detail setting menu is displayed by pressing the [FUNCTION] key during automatic cleaning ON/OFF selection.
CLEANING INTERVAL
Set the interval at which cleaning is to be performed periodically during printing.
Available setting values: [10 ~ 30000 mm] ( Default: 1000 mm)
CLEANING TYPE
Set a type of automatic cleaning.
Available setting values: [SOFT, NORMAL, HARD]
The setting values for each user type are stored separately from those for other user types.
Maintenance while printing (See 3-45)
While printing, set whether to perform automatic cleaning or wiping the heads.
Available setting values: [CLEANING , WIPING , OFF]
Cleaning will be performed at a movement interval as a unit after starting each drawing.
When cleaning is selected, the details setting menu is obtained with [FUNCTION] key.
Wiping will be performed at each scanning times as a unit after starting each drawing.
When wiping is selected, the details setting menu is obtained with [FUNCTION] key.
The setting values for each user type are stored separately from those for other user types.
CLEANING INTERVAL
Set the interval at which cleaning is to be performed periodically during printing.
Available setting values: [0.1 ~ 100.0 m] ( Default: 1.0 m)
CLEANING TYPE
While printing, the cleaning type is set.
Available setting values: [SOFT, NORMAL, HARD]
WIPING INTERVAL
Set the drawing interval for performing the wiping.
Available setting values: [10 ~ 9990] (10 time unit/ Default 50 times)
HEAD GAP (See 3-5)
Set the head gap (height from the media to the nozzle plane of the heads).
Available setting values: [1.5 mm ~ 7.0 mm] (In steps of 0.1 mm / Default: 1.5 mm)
The upper limit of the head gap varies with media thickness.
The setting values for each user type are stored separately from those for other user types.