Specifications

6-9
Invoking SET UP functions
REFRESH
Set the head refreshing level (running flush interval).
Available setting values: [0 ~ 3] ( Enhancing the level shortens the interval)
The setting values for each user type are stored separately from those for other user types.
VACUUM
Set the attracting force of the vacuum fan.
Irrespective of the setting, the vacuum level is always [STANDARD] during media detection, media cut-
ting or JOG operation.
Available setting values: [STRONG, STANDARD, Little WEAK, WEAK, OFF]
The setting values for each user type are stored separately from those for other user types.
Pressing [FUNCTION] key when the item other than OFF is selected, the time from the finish of online
printing to the stop of vacuum fan. (Only in the remote mode)
Available setting values: [0- 60min, CONTINUE] (unit 10min.)
If 0min is set, the vacuum fan stops when finishing printing.
If CONTINUE is set, the vacuum fan keeps rotating in the remote mode regardless of the printing status.
The setting values for each user type are stored separately from those for other user types.
PRIORITY
Concerning the following setup functions, select whether priority is given to the settings made on the
printer or to the designation from the host.
[MEDIA COMP.] , [HEATER] , [PRINT MODE] , [INK LAYERS] , [DRYING TIME] , [AUTO CUT] ,
[PRE-FEED] , [MARGIN] , [COLOR PATTERN] , [REFRESH] , [VACUUM] , [FD.SPEED] ,
[FD.METHOD]
Available setting values: [INDIVIDUALLY, ALL HOST, ALL PANEL]
The setting values for each user type are stored separately from those for other user types.
Even when setting has been made to give priority to the host, the settings made on the printer become
effective if there is no instruction from the host.
INDIVIDUALLY For each function, set whether priority is given to the printer or to the host independently.
ALL HOST For all the functions, priority is given to the settings on the host.
ALL PANEL For all the functions, priority is given to the settings on the printer.