Specifications

5 In Case of Trouble
5-24
∗∗∗∗ ERROR203 ∗∗∗∗
SDRAM SIZE
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
(When there is available SDRAM
mounted, the printer operation can be
resumed without expanding SDRAM.
However, printing speed may drop
depending on the resolution.)
∗∗∗∗ ERROR 207 ∗∗∗∗
SLEW RATE (----)
An error occurred in the wave shape
control during printing.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 207 ∗∗∗∗
OVERFLOW (----)
∗∗∗∗ ERROR 207 ∗∗∗∗
UNDERFLOW (----)
∗∗∗∗ ERROR 207 ∗∗∗∗
COM ABN. (----)
∗∗∗∗ ERROR 210 ∗∗∗∗
INTERLOCK SENSOR
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 211 ∗∗∗∗
HeaterTEMP(--/--/--)
An abnormal temperature of the media
heater was detected.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 211 ∗∗∗∗
HeadWARM.TEMP.(----)
An abnormal temperature of the head
heater was detected.
∗∗∗∗ ERROR 211 ∗∗∗∗
HeadWARM.BREAK(----)
The head heater is disconnected.
∗∗∗∗ ERROR 211 ∗∗∗∗
HeadWARM.THERM(----)
Trouble has occurred with the ther-
mistor of the head heater.
∗∗∗∗ ERROR 212 ∗∗∗∗
WASTE INKtank SENSOR
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 250 ∗∗∗∗
Y COORDINATES
An error was detected during scanning
operation.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 251 ∗∗∗∗
SYSTEM ERROR
A system error occurred.
Error message Cause Remedy