Specifications

4 Daily Maintenance
4-60
4 Loosen the screw securing the cutter unit and remove the cutter unit.
5 Remove the roller, and install it on the new cutter blade holder assembly.
6 Install the new cutter unit.
Tighten the screw to secure the new cutter unit.
7 Close the front cover, and press the [ENTER] key.
The printer returns to LOCAL mode.
Roller of cutter unit
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
PLEASE WAIT