Specifications

4-59

Replacing the cutter blade

The cutter blade is consumable.

When the cutter blade gets dull, replace it with a new one (SPA-0126).

STEPS:

1 Make sure that the printer is in LOCAL mode, and then press the [ST.MAINT] key.

If it is in REMOTE mode, press the [REMOTE] key.

2 Press the [ENTER] key.

The carriage will come out of the capping station.

3 Open the front cover.

 The blade is sharp. Be careful not to hurt yourself or anyone else.

 Keep the cutter blades away from the reach of children.

Be sure to dispose of the worn-out cutter blades according to the applicable

national and local laws and regulations.

 When replacing the cutter blade, it is recommended to place a sheet of paper

under the cutter blade. This will help pick up the cutter blade if it drops.

L. ∗ > [JV5-01]

width : ∗∗∗∗ mm

ST.MAINTENANCE

CARRIAGE OUT <ent>