Specifications

4 Daily Maintenance
4-58
4 Clean the wiper guide shaft using a cotton swab or cloth.
If dirt is hard to remove, use a cotton swab dampened with the cleaning solution.
5 Install the wiper by holding the projections at both ends.
Be careful of the direction of the wiper.
6 Close the maintenance cover, and press the [ENTER] key.
7 The printer returns to LOCAL mode.
ST.MAINTENANCE
COMPLETED : ent
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
PLEASE WAIT