Specifications

4 Daily Maintenance
4-56
Set the interval to display the warning message
Depending on the ambient temperature, set the interval to display the warning preventing color material
settling.
Setting time: OFF (disabled), 12 to 120 hours
STEPS:
1 Check that the machine is in the local mode and select [Maintenance] with the [FUNC-
TION] key. Then, press the [ENTER] key.
When it is in the remote mode, press the [REMOTE] key.
2 Select [ROUTINE SETUP] with the [] key, and press the [ENTER] key.
3 Select [Sub-INK WARNING] with the [] key, and press the [ENTER] key.
4 Set the operation time with the [] or [] key, and press the [ENTER] key.
5 Press the [END] key several times.
The machine returns to the local mode.
 When you use sublimation transfer ink Sb52, the display interval of the mes-
sage is set to 72 hours in the initial condition.
 When you use sublimation transfer ink Sb51, Sb53 or Sb60, this function is dis-
abled (OFF) in the initial condition.
FUNCTION
MAINTENANCE <ENT>
L * > [JV5-01]
width : ****mm
MAINTENANCE
ROUTINE SETUP <ent>
MAINTENANCE
ST.MAINTENANCE <ent>
7 times
ROUTINE SETUP
Sub-INK WARNING <ent>
ROUTINE SETUP
ROUTINE WIPING <ent>
4 times
Sub-INK WARNING
Sub-INK WARNING : 84 h