Specifications

4-43
Other maintenance functions
Changing warning time of flushing BOX cleaning or replacement
[BOX EXCHANGE LV]
Flushing BOX becomes tainted earlier than standard depending on using condition, operating condition, or
using ink type. This function sets flushing BOX cleaning or replacement time that is earlier than standard.
You can set by 5 levels (5/5 to 1/5).
Level 5/5 warns at standard time. Level 1/5 warns about twice earlier than standard. Change the setting to
the dirt around the station.
STEPS:
1 Make sure that the printer is in LOCAL mode, and then select [MAINTENANCE] using
the [FUNCTION] key and press the [ENTER] key.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select [FLUSHING BOX] by pressing the [] key three times and press the [ENTER]
key.
3 Select [BOX EXCHANGE LV] by pressing the [] key and press the [ENTER] key.
4 Input the BOX EXCHANGE LEVEL, using the [] or [] key.
Register the setting by pressing the [ENTER] key.
5 Press the [END] key several times.
The printer returns to LOCAL mode.
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
FUNCTION
MAINTENANCE <ENT>
MAINTENANCE
ST.MAINTENANCE <ent>
MAINTENANCE
FLUSHING BOX <ent>
3
times
FLUSHING BOX
CLEANING COMP. <ent>
FLUSHING BOX
BOX EXCHANGE LV <ent>
1
time
FLUSHING BOX
BOX EXCHANGE LV <ent>
When cleaning warning or error occurs for flushing BOX.
When no cleaning warning or error occurs for flushing BOX.
DirtCond. of the ST.
LEVEL : 5/5
is seen and changed.
BOX EXCHANGE LV