Specifications

4-21
Before executing the [PUMP TUBE WASH]
5 Press the [ENTER] key to go to the lower level of hierarchy and supply the cleaning
solution.
Once the cartridge is installed, the supply of the cleaning liquid will start.
Cleaning liquid is drawn up and the tubes are filled with the cleaning liquid.
Go to step 6 when the cleaning liquid is to be supplied for the first time or to step 9 when it is to be supplied
after the discharge of the old cleaning liquid.
Supply for the first time
6 Set a filling liquid cartridge according to the instruction on the display.
7 The cleaning solution is supplied.
8 Press the [END] key several times.
The printer returns to LOCAL mode.
 Either of the following displays will appear if a problem with the filling liquid
cartridge is detected.
Remove a filling
up cartridge.
There is a CARTRIDGE
Remove a wash liquid
cartridge.
There is a CARTRIDGE
Supply for the first time (To Step 6) Supply after discharge (To Step 9)
Set a filling up
cartridge.
CARTRIDGE : none
Remove a wash liquid
cartridge.
There is a CARTRIDGE
Set a filling up
cartridge.
CARTRIDGE : END
Set a filling up
cartridge.
CARTRIDGE : WRONG
or
FILLING UP NOW.
PLEASE WAIT
∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − − −
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm