Specifications

4-19
When the operation of the printer is to be suspended for a long time [CUSTODY WASH]
11Press the [ENTER] key.
Perform the nozzle cleaning.
On completion of the nozzle cleaning, the carriage moves to above the platen.
12Open the maintenance cover, and fill the caps with the cleaning solution using a
dropper.
Since the printer performs idle suction operation intermittently, repeat this work several times to clean the ink
discharge passage. Perform this operation with all the caps.
13Close the maintenance cover and press the [ENTER] key.
The printer performs idle suction for 30 seconds. The heads return to the station and after performing the initial
operation, the printer returns to LOCAL mode.
Fill a cap while
absorption stops.
ST.MAINTENANCE
01:00
ST.MAINTENANCE
COMPLETED :ent
More than 20 seconds remaining
Less than 20 seconds remaining
ST.MAINTENANCE
∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − − −
During The PostProc
PLEASE WAIT
During The PostProc.
PLEASE WAIT
∗Being Initialized∗
PLEASE WAIT
During The PostProc.
PLEASE WAIT
Ink cap
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
PLEASE WAIT