Specifications
4-15
Cleaning the ink discharge passage [DISWAY WASH]
3 Open the right maintenance cover.
4 Take the cleaning solution into the dropper.
During a pause of idle suction, drop cleaning liquid into a cap until just before it starts overflowing from the
cap.
Repeat dropping the cleaning liquid into each of the other caps the same way.
5 Close the maintenance cover and press the [ENTER] key.
6 The printer performs idle suction for 30 seconds, and after initial operation, returns to
LOCAL mode.
Ink cap
Fill a cal while
absorption stops.
ST.MAINTENANCE
COMPLETED : ent
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
PLEASE WAIT