Specifications

4-13
Cleaning the nozzle [NOZZLE WASH]
11With [] [] key, set the automatic power-off selection after the nozzle cleaning.
[POWER OFF] : No(default) : No power off.
Yes : Power off automatically after the end of the nozzle cleaning.
12Press the [ENTER] key.
The carriage returns to the station. The nozzles are capped and the display shown below continues for the set
waiting time during which suction of cleaning liquid and cleaning are performed.
On the lapse of the set waiting time, the printer performs the initial operation and returns to LOCAL mode.
 When you press [FUNCTION] key in the automatic power-off selection screen,
the cleaning type after the nozzle cleaning can be selected.
[CLEANING TYPE] : NORMAL, SOFT, HARD
CLtypeSetWithFUNCkey
ST.MAINTENANCE
POWER OFF :No
ST.MAINTENANCE
CLEANING TYPE :Normal
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
More than 20 seconds remaining
During The PostProc
PLEASE WAIT
ST.MAINTENANCE
01:00
Less than 20 seconds remaining
During The PostProc
PLEASE WAIT
ST.MAINTENANCE
∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − − −
∗Being Initialized∗
PLEASE WAIT