Specifications

3-32
Setting the deodorize fan
The fan operates during printing, and operates according to the set of [STOP TIME] from the completion of
printing.
Upon the setting of the deodrize fan, two items are settable as follows.
• STOP TIME : Setting the time from the completion of printing until the fan operation is interrupted.
• RENEW : The fan operation is executable even not in printing if it is set to “ON”.
1
Press the key in the local
mode.
2
Select [MACHINE SETUP] by pressing
the keys.
3
Press the key twice.
4
Select the item to be set by pressing the keys.
STOP TIME : Setting the time from the completion of printing until the exhaust fan is
stopped.
RENEW : Select this to operate the fan.
5
Press the key.
6
Select the set value by pressing the keys.
STOP TIME : 0 - 240 seconds or continuous running
RENEW : Select “ON” to operate and “OFF” to stop the operation.
7
Press the key.
8
Press the key several times to end.
• The deodrize fan is an option included in the drying ventilation unit.
• When a drier fan is equipped, the drier fan operates in linkage with the contents set here.
FUNCT I ON
SETUP <ENT>
FUNCT I ON
MACH I NE SETUP < ENT >
DEODOR I ZE FAN
STOP T IME <en t >