Specifications

3-31
3
Convenient use
Machine settings
It is each type of setting for using this machine more comfortably. [MACHINE SETUP] and [MACHINE
SETUP2] are available in this machine.
The following items are settable in MACHINE SETUP 1, 2.
Item
Set value
*1
*1. The setting at the time of purchase is indicated with the underline.
Outline
Machine Setup
DEODOR-
IZE FAN
*2
*2. DEODORIZE FAN is optional.
STOP TIME
0 ~ 120
~ 240min/
CONTINUE
Setting the time until the rotation of the exhaust
fan is interrupted after the completion of printing.
RENEW ON / OFF
Switching the current operation of the exhaust fan.
DRYNESS FEED ON / OFF
Setting whether feeding for drying a media is per-
formed after the completion of printing or not.
STAMP SETUP ON / OFF
Setting to output the output date and drawing con-
ditions after the completion of printing.
Waste Ink Warning ON / OFF
Setting whether a check message for the waste
ink tank is displayed or not.
Test Draw Arrange
FEED DIR. /
SCAN DIR.
Setting the deployment direction of the test pattern
when performing test printing repeatedly.
CART.PRIORITY
*3
*3. This function is valid only when the 4-color ink set is used.
INK LEVEL
EXP. DATE
Setting a cartridge to be used first for double car-
tridge automatic change function.
ROOM TEMP.
*4
*4. This function is available for the firmware Ver.4.60 and later.
Not wait ARR.
Wait arrival
Sets the operation when an error indicating that
the room temperature is out of the usable temper-
ature range occurs. ( P.3-38)
Machine Setup 2
CONFIRM. FEED ON / OFF
The feeding set for checking the result after test
printing is settable.
[BACK FEED] for returning a media to the original
position by pressing the key is settable
when set to “ON”.
TIME SET Setting the present date and time.
UNIT
SETUP
TEMP.
°C (Centigrade)
/°F (Fahrenheit)
Setting a unit of temperature indications.
LENGTH mm
/ inch Setting a unit of length and area indications.
MACHINE NAME 01 ~ 99
Setting a machine name (machine No.) for recog-
nizing each machine when plural machines are
connected through USB2.0 interface.
KEY BUZZER ON / OFF
Setting a buzzer sound of the time when a key is
pressed.