Specifications

2-31
Drawing data
2
Basic Operations
Stopping the print temporarily
Perform the following operations when stopping the print halfway.
1
Press the key in printing.
The printing operation is interrupted.
Interrupt data sending at the PC side during the
data is sent from the PC.
Printing restarts from the interrupted data by
repressing the key.
Erasing the received data (Data clear)
Erase only the received data to stop the printing.
1
Press the key in the local
mode.
2
Press the key.
The ACTIVE lamp goes out.
The received data is erased then it returns to the
local mode.
<LOCAL. 1> [ #01 ]
wi d t h :1272mm
DATA CLEAR
<ENT>
** DATA CLEAR **