Specifications

2-30

Drawing data

Starting the print

Set the media. ( P.2-6)

Check the heater temperatures.

• Confirm that the CONSTANT lamp lights in [PRE],

[PRINT], [POST] below the display.

Press the key in the local

mode.

• It enters the remote mode and enables to receive

the data from the PC.

Send the drawing data from the PC.

• The ACTIVE lamp blinks and the drawing condi-

tion is displayed.

• For the method of data transmission, refer to the

instruction manual for the output software.

This machine starts printing.

• The printing speed may vary due to the set media

width or the position of print origin even when the

same data is printed, depending on resolution.

• When a roll media is used, rewind the roll media by hands prior to printing so that it is set in the

tightened condition. The loosened may result in failures of the image quality.

TEMPERATURE CONTROL !

PLEASE WA I T

*REMOTE. 1* 720x720

16.Bd .Vd . x2 xx . xxm

Resolution : 360 /540 /720

/1440 DPI

Number of passes

The length of

media drawn

Scan direction

Ud : Unidirectional

Bd : Bidirectional

Data type

Vd : Variable data

Nd : Normal data

Scanning speed

x1 : Standard

speed

x2 : Double

speed