Specifications

2-26
3
Press the key.
4
By pressing the keys, select
the color on which you wish to perform
maintenance.
Silver : Perform maintenance only for silver ink.
White : Perform maintenance only for white ink.
Silver & white : Perform maintenance for silver ink and white ink at the same time.
5
Press the key.
6
Remove the ink cartridge of the
selected color.
• The lamp located above the cartridge lights to inform you of the ink cartridge to be
removed.
• After the ink cartridge is removed, ink discharging starts.
• When discharging is completed, the screen on the
right is displayed.
7
Slowly shake the removed ink cartridge more than twenty times
right and left.
• To prevent ink from leaking when you shake the cartridge, wear gloves and firmly cover
the A part of the upper surface of the cartridge and the B part of the bottom surface of the
cartridge with paper towels. Then, shake it more than twenty times right and left so that ink
flows inside the cartridge.
• If you shake it too strong, the pack inside may be damaged and it may cause
ink leakage. Therefore, perform this carefully.
• If the remaining amount of ink is less, ink in the cartridge cannot be beaten
enough. Tilt the cartridge until it becomes vertical.
SPOT COLOR SELECT
COLOR : S I L VER
SPOT COLOR SELECT
COLOR : WH I TE
SPOT COLOR SELECT
COLOR : S I L VER
*DISCHARGE*
03 : 00
SHAKE I NK CARTR I DGE
:
e nt
A part
(the place to stick a
needle)
B part
(the slot on the
bottom)
Cover with paper towel firmly and shake ink slowly
Repeat
this
A part