Specifications

2-21
Test printing
2
Basic Operations
Perform test printing with the normal test pattern
1
In the local mode,
press the key.
• Press and key to change the test pattern deployment direction.
The deployment direction changed here returns to the direction set in P.3-36 after test
printing.
• When performing test printing after changing the deployment direction from “SCAN DIR.”
to “FEED DIR.”, the line will be fed to the position of the first test printing.
• For the detail of the deployment direction of the test printing, see P.3-36.
2
Press the key.
• This machine starts printing the test pattern.
• After performing test printing, this machine returns
to LOCAL mode.
3
Check the printed test pattern.
• Finish the operations when it is in normal.
• Execute the head cleaning when it is in abnormal. ( P.2-25)
Check before the
test printing
• If a media has been set. P.2-6 • If the origin position has been set.
• If the head gap has been adjusted. P.2-6
TEST DRAW
(FEED DIR. ) <ENT>
** TEST DRAW **
<LOCAL . 1> [ #01 ]
width:****mm
Abnormal pattern
Clogged with ink
Normal pattern
Nozzles are dirty