Specifications

2-12
14
Secure the media on the take-up
device.
(P.2-13)
• When the Type B is used, this operation is not
needed.
( 1 ) Feed the media up to the core of the roll media
of the take-up device by pressing the key.
( 2 ) Fix the middle of the media with adhesive tape.
( 3 ) In the same manner, fix the left side and right
side of the media.
• Make sure that the there is no slack or wrinkle on
the media in such condition that the roll media is
pulled to right and left evenly, and then stick the
tape.
Entering the media remaining amount
When [MEDIA RESIDUAL] of the maintenance function is “ON” ( P.4-35), the screen for entering media
remaining amount is displayed after detecting the media width.
1
Display the screen for entering media
remaining amount.
2
Press and key to enter the
media remaining amount.
3
Press the key.
I nput o f Med i aLeng t h
MEDIA LENGTH =xxx.xm
I nput o f Med i aLeng t h
MED I A L ENGTH = 5 0 . 0m