Specifications

2-2
User type
Drawing of higher quality prints is available by making (setting of User type) the print set matching to the
characteristics of media when this machine is used for drawing.
On this machine, 4 types of User type 1 to 4 are settable.
Set items registrable to User type
For the registering procedures to User type (1 to 4), refer to P.3-2 .
Using the registered user type
1
In the local mode,
press the key.
2
Select User type (1 to 4) by using the
keys.
• This is also selectable by pressing the
key.
3
Press the key.
For selecting the user type without the key.
The user type is selectable from the local mode by pressing the key, not by pressing the
key.
Set items
Reference
page
Set items
Reference
page
Setting Media compensation
P. 3- 5
Setting of Refreshing
P.3-28Changing the set value of Heater
P. 3- 8
Setting of Adsorption
Setting Print mode
P.3-12
Setting of Feeding speed level
Setting of the number of ink layers
P.3-28
Setting of Priority P.3-20
Setting of Drying time
P.3-18
Setting of Auto cleaning P.3-22
Setting of Auto cut
P.3-28
Setting of In-printing cleaning P.3-24
Setting of Pre-feeding Setting of Media detection P.3-26
Setting of Margins
P.3-19
Setting of Feed origin P.3-28
Setting of Color patterns P.3-28
In the local mode,
press the
key.
Press the
key after [SET UP] is
confirmed.
Select User type (1
to 4) by pressing
the keys.
Press the
key.
<LOCAL . 1> [ #01 ]
width:****mm
USER TYPE CHANGE
TYPE ( 1 ) - > <
2 >:ent
<LOCAL . 2> [ #01 ]
width:****mm
Number of the selected user type