Manualshelf

Specifications

ManualsBrandsMIMAKI ManualsComputer equipmentJV33-160
31323334353637383940
1-16
Menu mode
This machine has 4 modes. Each menu mode is described below.
NOT-READY mode
This is the mode in which the media has not been detected yet.
The keys other than the key and the / key are effective.
LOCAL mode
Local mode is the mode for the drawing preparation state.
All the keys are effective.
The machine can receive data from the computer.However, it does not perform printing.
This mode permits the following operations:
• Pressing the JOG keys to set up a drawing origin and drawing area.
• Pressing the key to perform [TEST DRAW].
• Pressing the key to execute the cleaning of the heads.
• Pressing the key to set functions.
• Pressing the key to set the temperature of the heaters.
• Pressing the key to check the remaining amount of ink, the description of the cartridge error,
the model name, the firmware version, and so on.
• Pressing the key to switch between [REMOTE mode] and [LOCAL mode].
• Pressing the key to erase the printing data the machine has received.
• Pressing the key to change the user type.
• Pressing the key to activate directly [ST.MAINTENANCE], one of the [MAINTENANCE]
functions.
FUNCTION mode
To set FUNCTION mode, press the key when this machine is in LOCAL mode.
In this mode, printing conditions can be set.
REMOTE mode
This machine prints the data it receives.
During drawing, the drawing is interrupted by pressing the key.
<LOCAL.1> [#01]
width:1000mm