Specifications

1-12

Inserting ink cartridges

Insert an ink cartridges.

Shake the ink cartridge as shown on

the right.

Insert the ink cartridge.

• Insert the ink cartridge lengthwise directing the

surface having IC chips to the left side.

• Colors are displayed on the display as follows.

Black: K, Cyan: C, Magenta: M, Yellow: Y,

Light cyan: c, Light magenta: m, White: W,

Silver: S, Light black: k

Changing an ink cartridge

Perform as follows when [INK END] or [INK NEAR END] is displayed on the display.

 When [INK END] is displayed

(1) Pull out an ink cartridge to be replaced.

(2) Insert a new ink cartridge, paying attention to the direction of IC chip.

 When [INK NEAR END] is displayed

There is a little of ink left. It is recommended to replace the ink cartridge soon since ink may become

empty in printing while printing is continuously enabled.

• During [INK NEAR END] is displayed, the setting of In-printing cleaning is disabled. ( P.3-

24)

• If solvent ink is selected when the machine is installed, it is not possible to change from the

solvent ink to dye ink or aqueous ink.