Specifications

Connecting cables
1-11
1
Before Use
 Removing USB memory
If a USB memory module is inserted in the personal computer to which a JV33 machine is connected, click
"Stop" in the "Safely Remove Hardware" window by following the instructions given there first and then
remove the module.
Leaving a USB memory module inserted can cause [ERROR 10 COMMAND ERROR].
Copy the data onto the hard disk before outputting it for printing.
Connecting the power cable
1
Insert the power cable into an inlet of
the machine.
2
Secure a cable band.
• Secure the cable with the cable band attached to
this machine.
3
Insert the power plug into a plug
socket.
• Do not use other power cables than the attached power cable.
• Be sure to connect the power cable to the power plug socket near to this machine, and make
sure that the power cable is easily removed.
• Connect the power cable to the grounded plug socket. Otherwise, it may result in fire or an
electric shock.
Inlet
Power cable
Cable band
Power plug
Socket