Specifications

1-5
Names of Parts and Functions
1
Before Use
Rear / Sides
Pre-heater
Preheats the media before printing.
(Located inside the platen)
Roll holders
Hold a media by inserting it into the right and left ends
of the core of the roll media. Roll holders are available
for the 2 inches and 3 inches core of the roll media.
AC inlet
Connect the power cable to the AC inlet.
Clamp lever (rear)
Interlocks with the clamp lever in
the font of this machine.
USB 2.0 connector
This is USB2.0 interface connector.
Main power switch
Turns on/off the main power for this machine. Leave
the main power turned on to prevent ink clogging.
Cleaning solution
cartridge
Set a dedicated
Washings cartridge
(optional).