Specifications

4-47
4
Routine Maintenance
Replacing the cutter blade
The cutter blade is consumable. When the cutter blade gets dull, replace it with a new one (SPA-0107).
1
Press the key then press the
key.
• The carriage moves onto the platen.
2
Open the front cover.
3
Replace the cutter unit by the carriage.
(1) Loosen a screw of the cutter unit.
(2) Remove the cutter unit.
(3) Mount a new cutter unit.
(4) Fasten the screw of the cutter unit to secure the cutter unit.
• The blade is sharp. Be careful not to hurt yourself or anyone else.
• Keep the cutter blades away from the reach of children. Be sure to dispose of the worn-out
cutter blades according to the applicable national and local laws and regulations.
• When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter
blade. This will help pick up the cutter blade if it drops.
Front cover
Screw
Cutter
unit