Specifications

4-42
If Waste ink tank confirming message is displayed
Waste ink which was used for cleaning the heads and other parts, gathers in the waste ink tank. Upon the
machine, the ink discharging amount is counted by accumulated counting then a message for suggesting
the check is displayed when it reaches a certain amount.
If message is displayed when Ink filling or the like is executed
A message for suggesting to check the waste ink tank is displayed depending on the condition of the waste
ink tank when the function such as ink filling, head cleaning, pump tube washing or the like is carried out.
 When the waste ink tank is "Near-full"
The right message is displayed.
1
Check the condition of the waste ink tank.
When the waste ink tank is almost full
(1) Replace the waste ink tank. ( P.4-44)
(2) Select “Exchange” by pressing the key. (The ink discharging amount is reset.)
When the waste ink tank has room
(1) Select “Continue” by pressing the key. (The ink discharging amount is not reset.)
• In this case, the message of P.4-43 "Check message in Local mode" is displayed when it
returns to the local mode.
 When the waste ink tank is full
The right message is displayed.
1
Replace the waste ink tank ( P.4-44) then press the key.
• The ink discharging amount is reset.
• Be sure to replace the waste ink tank ( P.4-44) if "Exchange" is selected by the operations
above when the waste ink tank is "Near-full" or "Full". Waste ink may overflow the tank before
the check message is displayed if the tank is not replaced and continuously used.
• Waste ink, which is discharged when [NOZZLE WASH], [PUMP TUBE WASH] and [CUS-
TODY WASH] of [ST.MAINTENANCE] are performed, is not counted upon the machine. Be
sure to check the condition of waste ink tank before or after the operations.
*Checkwaste ink*
Con t i nue< >Exchange
*Checkwaste ink*
Exchange : e nt