Specifications

4-7
Maintaining Capping station
4
Routine Maintenance
Replacing the wiper
The wiper is consumable.When the display indicates that it is necessary
to replace the wiper, immediately replace the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
1
Press the key in the local
mode.
2
Select [WIPER EXCHANGE] by press-
ing the keys.
3
Press the key.
• The carriage moves onto the platen.
4
Open the front cover then remove the
wiper.
• Pull out the wiper by holding the projections at
both ends.
5
Insert a new wiper.
• Install the wiper by holding the projections at both
ends.
6
Close the front cover then press the
key.
• After performing the initial operation, the machine
returns to LOCAL mode.
• The wiper to be newly installed is available as an option. Order it from your dealer or a sales
office of MIMAKI.
• Do not select [WIPER EXCHANGE] at any time other than when the wiper is to be
replaced.Once it is selected, the number of wiper operations that is counted in the machine
will be reset.
<LOCAL . 1> [ #01 ]
Rep l ace a WI PER<MNT>
ST . MA I NTENANCE
CARR I AGE OUT <e n t >
ST . MA I NTENANCE
WI PER EXCHANGE <en t >
ST . MA I NTENANCE
COMP L ETED : e n t
Projection
Projection
( COVER OPEN )
PRESS <ENT> KEY
*Be i ng Ini t i a l i zed*
PLEASE WA I T