Specifications

Maintaining
4-4
Cleaning the media sensor
A media sensor is located at the platen on the backside. It may cause misdetection of media when dust or
the like is accumulated on the sensor.
Using a cotton swab, clean the surface of the sensor of dust and dirt.
When cleaning the sensor on the lower surface of the head is cleaned, move the carriage to the left end by
the operations of step 1 of P.4-16 "Cleaning the heads and their surrounding parts", and then clean it.
Cleaning the media press
Media feeding may not operate properly in printing if cutting waste, dust or the like is accumulated on the
media press, nor may print properly if dust or the like sticks to the nozzle.
Clean the media press periodically.
Media sensor Media sensor
The backside of the machine The lower surface of the head
Media press