Specifications

Overhaul of Driving Parts
3-29
Removing/Installing the X-axis motor assembly
1 Turn the main power supply of the printer off.
2 Remove Left Cover. (See P.3-5 )
3 Remove the screws (x2) attached to the
XM bracket.
4 Remove the X-axis motor connector.
5 Remove the spring, and remove the XM
bracket and X-axis motor from the main
unit.
6 Remove the screws (x3) attached to the
XM bracket, and remove the X-axis
motor assembly.
7 Reattach by reversing the removal procedure.
Be sure to shut the main circuit breaker to prevent unexpected movements.
The belt tension does not need to be adjusted.
XM bracket
X-axis motor