Specifications

Overhaul of PCBs
3-21
6 Save Parameter File.
Parameter Save Window automatically appears
when Upload is successfully completed.
Enter file name to save parameters.
7 Turn off the power of JV33.
Confirm the indication shown on the right on
Operation Panel of JV33 before shutting down.
Removing/Installing the main PCB
1 Shut off the main power.
2 Remove the screws (x6) of the power BOX cover.
3 Remove the screws (x6), and remove the
main PCB from the front.
4 Release the connectors.
5 Install by reversing the removal procedure.
If upload is failed or impracticable, conduct Parameter Draw to note the parameter
values and manually register them after the work is completed.
Be sure to shut the main circuit breaker to prevent unexpected move.
Up & Download END
Power Off