Specifications

Color Inkjet Printer JV33-130/160

3-8

Preparation (Cleaning within Head)

Charge Head Change Washing.

Remove Damper Assembly from Washing Jig

in the head, and charge Syringe with 12-16 cc of

S-head Change Washing.

* Confirm the current type of ink when choosing

the washing liquid. The type of washing liquid

depends on the ink.

Each washing jig is exclusively for use with the

corresponding washing liquid. Do not use a jig

with a different washing liquid.

~ Types of Wash ~

ES3 Ink:

MILD SOLVENT WASHING LIQUID (SPC-

0294)

Connect Damper to Head.

Reassemble S-damper assembly with Syringe

and join it with Damper Connector on Head.

* Be careful of MS washing liquid dripping on the

operation of the damper. Dripping on the FPC

connector may damage the head.

Slowly pour the washing liquid.

Pour 3-4 cc of washing liquid into each nozzle

over about 30 seconds.

* Pour washing liquid slowly, or the Head may be

damaged.

Use waste cloth to receive liquid that spills out of nozzle.

Conduct the above for every nozzle (x8). (Charge the syringe with washing liquid every 4 nozzles.)

* Do not touch the nozzle surface with waste cloth, nor rub the nozzle surface. Both may cause discharge failure.

Washing inside the head is only required when filling with Solvent Ink. Do not wash inside

the head when using Aqueous Ink.

Syringe

S-damper Assembly