Specifications

Outline

3-3

3-1-2. Tools and jigs

 Tools to be used at disassembly and reassembly

 Adjustment tools

Name Remarks

Phillips screwdriver Type 1

Type 2

For M2

For M3 to5 (L=260 or more)

for M3 to 5

Slotted screwdriver Long side 2.5 mm for removing E-rings

Hexagon wrench 1.5 mm for M3 SSWP

2.0 mm for M4 SSWP

2.5 mm for M3 cap bolts (L=170)

5.0 mm for M6 cap bolts

6.0 mm for M8 cap bolts

Spanner Width across flats: 5.0 mm

Width across flats: 5.5 mm for M3 nuts and hexagon stud

Width across flats: 7.0 mm for M4 nuts

Tweezers To prevent the cable from being pulled when disconnecting the connector.

Long-nose pliers

Nippers

Soldering iron

Solder

Scale 150, 500 mm

Bar type tension gauge 500 g

Loupe About 50x to 60x magnification

Protection glasses

Gloves To keep hands clean, and for safety.

Adhesive agent LOCKTITE242 (for locking screws)

Insulation lock L=150 or less (UL-approved product)

Goggle

Nitroflon tape or acetate fabric tape As required (UL-approved product)

Waste cloth

Cotton swab

Name Code Remarks

Trimmer adjustment screwdriver For adjustment of trimmers on the power supply PCB.

Tester

Bar type tension gauge 500 g

Ink line airtight tester OPT-J0094