Specifications

Color Inkjet Printer JV33-130/160

2-36

SKEW CHECK

Skewing of media is checked.

When media is not detected, an operation error (ERROR30) is displayed.

Feed distance is designated to execute feeding.

Feed distance: 1~500 m (unit: 1 m)

During the feeding, remaining of feed distance is displayed with unit of 10 mm.

[END]

: Feeding abort,

[ENTER]

: Start feeding again.

 Cut jig function

After the Skew check starts, (feed distance is not designated) the following operation starts the cut jig

function.

[REMOTE]

→

[FUNCTION]

The cut jig function repeats media cut → feed with designating feed distance and number of cut times.

Number of cut times is displayed in count down during cut.

Feed distance: 10~10000 mm (unit: 10 mm Default: 500 mm)

Number of cut times: 1~1000 count (unit: 1 count Default: 25 count)

TEMPERATURE.CHK

Item Content

HEAD TEMP. Environment temperature of head is displayed (A/D value is also displayed).

Displaying of head temperature uses a unit selected in the UNIT SETUP of the MACHINE SETUP.

NOZZLE TEMP. Nozzle temperature error check is executed.

At Normal: OK is displayed

At error: NG is displayed

HEAT SINK TEMP. Temperature of HDC board heatsink is displayed (A/D value is also displayed).

Displaying of heatsink temperature uses a unit selected in the “UNIT SETUP” of the

MACHINE SETUP.

SLIDER TEMP. Temperature read from the thermistor on the slider PCB is displayed (A/D value is also displayed).