Specifications

Color Inkjet Printer JV33-130/160
2-22
MANUALhead WASH
At head cleaning with a syringe (after head replacement and so on), cap off to execute dry suction.
DEFAULT SET
Setting initial value to a selected parameter.
<Manual head cleaning operation sequence>
No. Item Operation content Notice
1 Suction 1. Cap OFF
2. Dry suction (pressing
[ENTER] to drive corresponding motor)
If a warning on waste ink tank arises, filling is not conducted.
(Waste tank sensor monitoring)
2 End Press [ENTER] to stop pump motor and return to 1.
<Default set>
No. Selection Item Operation content Notice
1 SETUP PARAMETER 1. Initialization of user operation setting value
2. Set user No. to 1
3. Initialization of language to be used
4. Initialization of User dot position compensation value
5. Set to maintenance close
Always selectable
2 MAINTE. PARAM. Initializing the parameter in question
3 CUSTOM. PARAM. Initializing the parameter in question
4 RUNNING PARAM. Initializing the parameter in question
5 EXCHANGE PARAM. Initializing the parameter in question
6 INKSYSTEMparam. Initializing the parameter in question
7 INKinfor.PARAM. Initializing the parameter in question Quasi-disclosure
parameter (Selectable
only at releasing)
8 INKinfor.PARAM. Initializing the parameter in question
9 INKSEQUENCEpara Initializing the parameter in question
10 HEADunit PARAM. Unit selection: UNIT-1~4, ALL
11 SERVO PARAMETER Initializing the parameter in question
12 TEST PARAMETER Initializing the parameter in question
13 CORRECT PARAM. Initializing the parameter in question
14 ADJUST PARAM. Initializing the parameter in question