Specifications

Color Inkjet Printer JV33-130/160
2-16
 Errors related to ink residual quantity
Errors related to ink residual quantity are shown in the table below.
* Arises at 220cc cartridge: 400cc, 440cc cartridge: 800cc.
Ink wear-up cleaning (4-color only)
 The purpose of this cleaning is subduing ink consumption of a normal cartridge by using residual ink
of a cartridge having “Cartridge near end” error or “Cartridge ink end” error by priority.
 When one cartridge is normal at starting of cleaning, residual ink side is sucked and after suction,
switched to the normal cartridge to continue cleaning.
 When residual ink is used up (soft counter), “Residual quantity 0 cartridge” error is arisen to disable
the cartridge.
<Errors related to ink residual quantity>
Item Content
Cartridge near end Error arising timing:Residual quantity detection by the near end detection board.
Set value of each cartridge is as the followings.
220 cc cartridge: 20 cc
440 cc cartridge: 40 cc
Restrictions after arising of an error:
Initial filling is not allowed (drawing and cleaning is allowed).
Cartridge ink end Error arising timing:Arising at consumption of predetermined quantity after the near end
detection.
Restrictions after arising of an error:Drawing and initial filling are not allowed (cleaning is
allowed).
Residual quantity 0 cartridge
(4-color only)
Error arising timing:Arising at residual quantity 0 after arising of ink end.
This error may arise only after cleaning by the ink wear-up cleaning.
Restrictions after arising of an error:
Drawing, initial filling and cleaning are not allowed.
Cartridge error Error arising timing:Arises when the ink end does not arise even if ink consumption quantity
exceeds about double of ink cartridge capacity*.
Restrictions after arising of an error:
Drawing, initial filling and cleaning are not allowed.
Ink wear-up cleaning control is only effective in the normal cleaning, and it can not be executed at
other cleanings or at initial filling.