Specifications

Color Inkjet Printer JV33-130/160
2-6
 DISCHARGE&WASH
Ink in head, damper and tube is discharged to execute cleaning.
*1 As an IC chip is not placed in a pre-fill up solution cartridge, it is recognized that IC chip read error means normal.
 Washing solution/fill up/discharge
Dedicated washing solution for PUMP TUBE WASH is filled.
Note: At discharging
1. Remove a cartridge
2.Run the ink/suction pump, and eject the ink.
At filling
1. Set a cartridge
2. Run the ink/suction pump, and fill with ink.
 About the waste ink tank warning
The amount of ink discharged is monitored by the counter in the firmware, and depending on the situ-
ation, before operations involving suction (cleaning, filling, and discharge), a prompt to replace the
waste ink tank may be displayed.
<DISCHARGE&WASH operation sequence>
No. Item Operation content Notice
1 Ink discharging 1. Taking out cartridges (all slots) (Cartridge sensor monitoring)
2. Discharging ink (Ink suction motor driving)
As for the detail of “About the waste ink tank warning” ( p.2-6) .
Cartridge valve is closed.
2 Washing 1. Inserting washing solution cartridges (all slots)
(Cartridge sensor monitoring*
1
)
2. Cleaning inside of tube.
(Opening cartridge valve, ink suction motor driving)
As for the detail of “About the waste ink tank warning” ( p.2-6) .
3. Head vibrating operation (Y-axis motor) is executed.
3 Discharging of washing
solution
1. Taking out washing solution cartridges (all slots).
(Cartridge sensor monitoring)
2. Discharging washing solution (ink suction pump motor driving)
As for the detail of “About the waste ink tank warning” ( p.2-6) .
Cartridge valve is closed.
4 Repeating 3~4 are executed again.
5 Operation selection [] Re-Wash : No.3 → 4 are executed again
[] COMPLETED : (to next No.)
6 Confirmation of
maintenance washing
solution discharge
[] No : to No.9 (End)
[] DISCHARGE : (to next No.)
7 Maintenance washing
solution discharge
See the next item, “Maintenance washing solution fill/discharge
operation sequence“
8 End (When cleaning is executed, the state is Not-filling at discharging
ink.)
<Washing solution filling operation sequence>
No. Item Operation content Notice
1 Start Washing solution suction (ink suction motor driving)
If a warning arises in the washing solution cartridge, filling is not
executed.
As for the detail of “About the waste ink tank warning” ( p.2-6) .
Waste ink tank cleaning
2 Filling 1. Run the pump.
2. Cartridge valve open.
(until washing solution is filled in the wiper cleaning valve)
3. Cartridge valve close.
4. Pump stop.