Specifications
Operation Principle
2-5
PUMP TUBE WASH
Cleaning of ink discharge path. Operation sequence is as the following.
Note : In order to avoid dehydration of nozzle surface and inside of the cap, a warning beep is made every 30 seconds.
(Only at maintenance closing)
CR.MAINTENANCE
Execution of carriage maintenance (cleaning in the vicinity of head)
Note : In order to avoid dehydration of nozzle surface and inside of the cap, a warning beep is made every 30 seconds.
(Only at maintenance closing)
HD.MAINTENANCE
The following maintenance items of head are executed.
FILL UP INK
Select a head to fill ink
<PUMP TUBE WASH cleaning operation sequence>
No. Item Operation content Notice
1Start 1. Cap OFF
2. Moving the carriage to the maintenance position, wiper ON, servo
motor OFF.
2 Maintenance
(Nozzle wash)
The following operations are repeated until
[ENTER]
is input.
1. Pump tube lock
2. 10 seconds No action
3. 5 seconds dry suction
Cleaner is injected into
the cap when you press
the
[FUNCTION]
key.
3End 1. 20 seconds dry suction
2. Execution of initial operation (original position detection)
<CR.MAINTENANCE operation sequence>
No. Item Content Notice
1Start 1. Cap OFF
2. Move he carriage to the maintenance position in the left end, servo
motor OFF.
2 Maintenance No action during the maintenance.
(Waiting for inputting
[ENTER]
of maintenance end.)
3 End Move the carriage, and execute initial operation
(original position detection)
<FILL UP INK operation sequence>
No. Item Content Notice
1 Start When a waste ink tank warning occurs, a warning is displayed.
As for the detail of “About the waste ink tank warning” ( p.2-6) .
2 Filling Open cartridge valve and drive ink suction motor.
The operation is stopped when a warning is detected in ink
cartridge during the filling.
Use a cartridge having
smaller residual ink
quantity.
(4-color UISS only)
3 End Stop the pump motor.