Specifications

Circuit Board Specifications
5-9
5-2-5. Ink slider PCB
 Board name: Ink slider PCB assembly (E104855)
 Located on the top of the print part slider.
 FFC from HDC is connected to relay signals to head. In addition, the paper width sensor, LED pointer,
Y cut cutter, encoder PCB etc. are connected to it.
Ink slider PCB Connector Signals
5-2-6. Keyboard PCB
 Board name: Keyboard PCB assembly (E104539)
 It has a LCD with 2 lines of 20 characters and key switches. It is connected to the main PCB with a
keyboard cable.
5-2-7. Encoder PCB
 Board name: Encoder PCB assembly (E103961)
 There are total 1 boards, namely a board for linear scale placed behind the slider.
5-2-8. Take-up PCB
 Board name: Take-up PCB SK assembly (E300413)
 It is used as a relay for the take-up motor and it is connected to the station PCB via an external
connector that the user can attach to the take-up unit.
Take-up PCB Connector Signals
< Ink slider PCB connector signals>
CN No Pin Connected to: Silk display Notice
CN1 30 Main PCB IO control
CN2 50 Main PCB Head control
CN3 30 Main PCB Power source
CN4 30 Main PCB COM waveform
CN5 35 Head
CN6 31 Head
CN7 4 Paper width sensor PAPER
CN8 6 AUX.
CN9 3 Head height sensor HEAD-HI
CN10 5 Linear encoder PCB L-ENC
CN11 2 LED pointer LED
CN12 3 Y cut cutter CUT
CN13 11 Head memory PCB MEM Head heater, Head memory
CN14 6 Debug connector JTAG
<Take-up PCB connector signals>
CN No Pin Connected to: Silk display Notice
CN1 9 External connector cable Power source
CN2 5 Start, direction changing switch
CN3 6 Take-up motor